产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

水平分型脱箱造型线易错箱

网址:www.zaoxingji.com.cn  2022-09-24  作者:admin    阅读:

水平分型脱箱造型线易错箱
The modeling line of horizontal parting detachable box is easy to misplace
由于水平分型脱箱造型线自身设计的原因,铸件易产生错箱。对于新的设备而言,不考虑模具因素的情况下,产生错箱的原因如下:
Because of the design of the horizontal parting line, the casting is easy to produce wrong box. For the new equipment, without considering the mold factor, the causes of wrong box are as follows:
①定位砂箱或模板的销、套磨损较快,影响定位精度,应定期检查,及时更换。
① The pin and sleeve of positioning sand box or formwork are worn fast, which affects the positioning accuracy. It should be checked regularly and replaced in time.
②推型速度过快山刷房 保定网站建设 保定强夯 卷扬式启闭机  保定网站制作 收费岛模具 遮阳网 麻绳,导致上下型移位。上下型合箱后由造型机内合箱工位推向辅线,通常为保证生产线的效率,速度较高。特别是造型线运行时间较长,辅线上运输小车的车轮磨损而造成小车上平面低于合箱工位时,这种错箱的现象会更严重。
② The pushing speed is too fast, resulting in the up and down type displacement. After the upper and lower closure, the inner closure station of the molding machine is pushed to the auxiliary line, usually to ensure the efficiency and high speed of the production line. Especially when the molding line runs for a long time and the wheels of the transport trolley on the auxiliary line are worn, which causes the upper plane of the trolley to be lower than the closing position, the phenomenon of wrong box will be more serious.

返回新闻

手机
13930206675