产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

震压式造型机

网址:www.zaoxingji.com.cn  2022-06-21  作者:admin    阅读:

震压式造型机
2. Shock compression molding machine
该机的工作原理是对震实的砂型再进行压实,可以获得上下部紧实的砂型。常用的是微震压实式造型机(微震压实式造型机 )是利用工作台下落与浮动的震铁相撞,微震紧实型砂,再进行压实。微震是以较高频率(500~1000次/分),小振幅(5~25毫米)的振动代替震实式造型机的低频率 (60~120次/分)﹑大振幅的振动。这种造型机的优点是设备造价低,操作简单,所造砂型紧实度基本均匀,对厂房基础要求也较低。缺点是噪声严重,工人劳动强检查井钢模具 隔离墩模具 隔离墩钢模具 流水槽模具 U型槽模具 螺杆启闭机 卷扬式启闭机 铜雕佛像 度大,生产效率低下,环境污染较严重。
The working principle of the machine is to compact the sand mold which is vibrated and compacted again, so that the upper and lower compact sand mold can be obtained. Commonly used is the micro shock compaction molding machine (micro shock compaction molding machine), which uses the falling of the working table to collide with the floating vibrating iron to compact the molding sand with micro vibration, and then compact it. Microseism is a kind of vibration with high frequency (500-1000 times / min) and small amplitude (5-25 mm) instead of low-frequency (60-120 times / min) and large amplitude vibration of compaction molding machine. The advantages of this molding machine are low equipment cost, simple operation, the compactness of the sand mold is basically uniform, and the requirements for plant foundation are low. The disadvantages are serious noise, high labor intensity, low production efficiency and serious environmental pollution.

返回新闻

手机
13930206675