产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

浇注机常见问题

网址:www.zaoxingji.com.cn  2021-11-12  作者:admin    阅读:

浇注机常见问题
Common problems of pouring machine
1、不了解什么是最佳浇注?进而导致错误地评价和选择浇注设备。
1. Don't know what is the best pouring? This leads to wrong evaluation and selection of pouring equipment.
2、采用垂直分型无箱造型线,却错误地选择补充铁水需要停产的或者低效率的浇注机。
2. The vertical parting no box molding line is adopted, but the pouring machine which needs to stop production or low efficiency to supplement molten iron is wrongly selected.
3、 采用垂直分型造型线,却错误地选择水平分型造型线浇注机。
3. Vertical parting molding line is adopted, but horizontal parting molding line pouring machine is wrongly selected.
4、非加热的浇注机用于水平分型有箱造型线浇注灰铁,这绝对不是一个理想的选择,特别是用于大型复杂件生产时(例如发动机机体和缸盖铸保定平面设计培训 收费岛模具 挡土墙模具 防撞墙模具 防撞墙模具 防撞护栏模具 大棚遮阳网 遮阴网件),这简直是一个错误。
4. The unheated pouring machine is not an ideal choice for pouring gray iron in horizontal parting box molding line, especially for the production of large and complex parts (such as engine block and cylinder head castings), which is a mistake.
5、错误地认为,水平造型线浇注机必须要有追包的功能,才能正常生产。
5. It is wrong to think that the pouring machine of horizontal molding line must have the function of chasing the ladle in order to produce normally.
6、在高速造型线,错误地认为手工浇注比全自动浇注机节约。
6. In the high-speed molding line, it is mistakenly believed that manual pouring is more economical than automatic pouring machine.

返回新闻

手机
13930206675